U.S. Made Only - 750 - 755 - 758 - 778 - 756 - 776 - 770 - 775 - 724 - 734 - 774 & School Models not listed
Both auto winding and stylist line type bobbin case systems
Singer 750 Touch and Sew
Singer 756 Touch and Sew
The Free Stuff - Repair Tips & Schematics
Threading
Bobbin Winding
Clam Shell Controller Repair - Non Solid State - 8 Pages
Controller not performing like it use to, getting hot, or just started
running at high speed all the time? It may have burnt contact
springs, or worn carbon element. This guide will help you
inspect, repair, and get it going again
(Download Only & Is Included in My Own Guide Below)
$4.95
700 Series T&S Tension Repair Guide
6 Pages showing you how to take apart the tension unit, check for
broken parts, re-assemble and adjust for proper basic tension settings
(Download Only & Incluced in my Own Guide above right)
$4.95
My Own Repair Manual  - 106 Pages of Information - click me
Covers All These Items & More - For US Made Touch & Sew
Needle To Hook Timing, Feed Timing, Top Tension Repair,
Buttonholer System, Bobbin Winder, Bobbin Case System,
Remove the Main Shaft & change the Timing Belt, plus lots more.  
Some items may apply to German/European models, ask first
I do suggest the Factory Guide as well, as there are things covered in
it that mine does not cover, so armed with both, you should be able to
tackle a Touch & Sew problem.
(3.5 megs - download only)
More Info
$19.95
Motor Service Guide - 9 Pages   Motor running sluggish?
This guide will help you take the entire motor apart, inspect, repair
and put it all back together again
(Download Only & Included in My
Own Manual above - to the right)
$4.95
Counter
Timing Guide Only
700 Series Touch & Sew - Hook to Needle & Feed Timing Guide
7 Pages, complete with pictures and instructions on how to time any
U.S. Made 700 Series T&S
Included in the guides above & below
$7.00
Bobbin Case Inspection
163131 Touch & Sew Bobbin
Fits: All T&S 600 - 700 with auto wind system
Also fits 1411 & 1425
In Stock
Yes Usually ships in 2-3 business days
$0.85 Each

979314-031 Electronic Foot Control with 3 Pin Cord
Fits: Non-Solid State T&S: 758-756-778-776-774-724
Inquire if not sure - provide model number
Does not fit the 750, 770
In Stock
No Usually ships in 2-3 business days
$31.95
put it back together in the same order I took it apart.  A small flashlight to see into tight spots and some uninterrupted time to spend on my machine
was very helpful.  I say go for it. Forget the repair guy.  I did this myself after sending it to the shop one year to have gears done. They only did one
and charged me $110.  I even asked them to replace the other one if it looked bad. The next year the gear that meshed with the first one died.
No way was I spending that kind of money for another gear. I take better care of my own machine, thanks to Terry and the help of this group.
Sandy in NC
Bobbin Case Position Brackets
Bobbin Case Removal
SR-750 Instruction Book Singer 750 Golden T&S
Also apply to these models: 750 - 755 - 770 - 775 -771
$5.00
174198 General Purpose Needle Plate
Fits: All 700 Series US Made T&S
750 - 758 - 756 - 770 - 775 - 778 - 776 - 724 - 774
In Stock
Yes Usually ships in 2-3 business days
$10.50
700 T&S Top Tension - Theory Of Operation
750/770 Top Hat/Pattern Cams
700 Series U.S. Made - Repair Guides, Instruction Book 750/770
SM-750 Factory Repair Guide - 40 pages
In combination with my own guide, to the right, you should
be able to repair just about any problem your 750 may
have.  Both guides also apply to models: 755 - 770 - 775 -
771 - 756 - 758 - 778 with some differences in the bobbin
case system in models 774 - 776 - 719 - 717 - 724,
they do not have the auto wind bobbin.  
Please note - this
is an adjustor's manual, does not show parts
replacement - Download Only)
In Stock
Yes
$12.00
172599-001 Reverse Lever
Fits all 700 Series T&S - The reverse lever is not an
easy part to change, requires removing the buttonhole
unit - Covered in My Own Repair Guide
In Stock
No Usually ships in 2-3 business days
$11.50
382437 Improved Position Bracket
Fits all 700 Series T&S with auto wind bobbin
Does not fit T&S Apollo Bobbin case systems
A must have over the original bracket
In Stock
No Usually ships in 2-3 business days
Note: These come in either Silver or Black
See bottom of page for 2nd hand part
$3.25
163636 Bobbin Winder Unit
Fits all 700 Series Apollo Bobbin Case type
systems
Models: 714 - 717 - 719 - 724 - 734 - 774 - 776
In Stock
Yes Usually ships in 2-3 business days
$18.95
163246 Hook Driver / Bobbin Winder
Fits All 620 - 630 - 640 & 700 T&S
Does not fit 600 - 603 T&S's with two locking nuts
In Stock
No Usually ships in 2-3 business days
$21.95
153022 Position Finger - Bobbin Case
Fits All 700 Series T&S with Auto Wind Bobbin
Other Part #'s: 172950 - 174230 - 383471
In Stock
Yes Usually ships in 2-3 business days
$1.20
163788 - Bobbin Winder Lift Cam
Fits All
Flat Bed 700 Series Touch & Sew
750 - 758 - 756 - 755
Does not fit Free Arm T&S
In Stock
Yes Usually ships in 2-3 business days
$13.95
382820 - Bobbin Winder Lift Cam
Fits All
Free-Arm 700 Series T&S
770 - 771 - 775 - 778
Does not fit the Flat Bed models
In Stock
Yes Usually ships in 2-3 business days
$13.95
163289 Rotating Hook
Fits all
Auto Wind Bobbin US made T&S - 700 series
Does not fit German or Asian models,
nor the US made Apollo Bobbin Case System series
In Stock
Yes Usually ships in 2-3 business days
$35.95
Ships Flat Rate Small Box Only
172075 Presser Foot - ZigZag
Fits: All 700 T&S - shank is included
This is not a snap on/off like the original
In Stock
Yes Usually ships in 2-3 business days
$5.50 Click Here For More Presser Feet
163822 - Needle Bar Gib
Fits all 700 Series T&S's inside the needle clamp
If the needle falls out, perhaps this item is worn or missing
In Stock
Yes Usually ships in 2-3 business days
$1.85
163149-004 Spool Lead-Off 600 & 700 T&S
New replacement spool stops for all Singer T&S
with horizontal thread delivery systems
In Stock
Yes Usually ships in 2-3 business days
$5.50
163149S-2 Replacement Sponge - Small End
For 163149-004 & 163148-002
Replacement sponge for Spool Stops
In Stock
Yes Usually ships in 2-3 business days
$2.50
163149S Replacement Sponge - Large End
For 163149-004
Replacement sponge for Spool Stops
In Stock
Yes Usually ships in 2-3 business days
$2.50
163300 - Bobbin Case Repair Kit
Tension Parts for T&S Bobbin Case
Kit includes: Tension Screw - Tension Arm & Oval Nut
See Bobbin Case Inspection Guide
In Stock
Yes Usually ships in 2-3 business days
$5.90
163786 - Bobbin Winder Lever
700 T&S Flat Bed Only
Use with 163788 above (New Number 445827-451)
In Stock
Yes Usually ships in 2-3 business days
$8.95
382822-451 - Bobbin Winder Lever
700 T&S Free Arm Machines
Use only with 382820 above
In Stock
Yes Usually ships in 2-3 business days
$12.95
Singer 770 Touch and Sew
750 T&S
770 T&S
756 T&S
163124-004 - Touch & Sew Bobbin Case
Fits: All Auto Wind 600 & 700 Series
Does not fit 776 - 774 - 724
see Stylist page
In Stock
No Usually ships in 2-3 business days
$39.50
Check 2nd hand page for good used parts
172803 - Replacement Cam Stack Drive Gear
Fits: 750 - 755 - 770 - 775 - 756 - 776 - 771
717 - 417 - 774 - 724 - 758 - 778 - 737 - all 700 series
Will require use of some original parts - cam gear only
In Stock
Yes Usually ships in 2-3 business days
$48.50
Advise shipping - small flat rate box
141896-451 - Feed Dog Screw
All 600 & 700 T&S
Sold in sets of 2
In Stock
Yes Usually ships in 2-3 business days
$3.00
172956 - Slide Plate
Fits all 700 Series T&S
Flat Bed Models
Does not fit Free-Arm models
In Stock
Yes Usually ships in 2-3 business days
$13.50
Have some 2nd hand plates below
Extended
Warranty Options
Available
Click for details
174283 Timing Belt
Fits: All 700 Series T&S
Also fits the 1060 Electronic
In Stock
Yes Usually ships in 2-3 business days
Options
$10.95
619386 - Replacement Light with/wire leads
Requires a 15watt bulb
Do not use a 25watt vacuum cleaner bulb
In Stock
Yes Usually ships in 2-3 business days
$21.90
Bobbin Winder Adjustment
445349-903 Spool Pin
Fits all 700 T&S Series
Note: it is longer than the original stock spool pin
In Stock
Yes Usually ships in 2-3 business days
$2.50
381790-451 - Improved Top Thread Guide
Fits: All 700 Series US made T&S models
May require modification, not all models had
the longer extrusion pin at the base of the thread guide.
Cut the extrusion pin off, and mount normally.
In Stock
Yes Usually ships in 2-3 business days
$4.25
174416 - Check Spring - Fits:  700 series T&S
750 755 770 734 774 775 758 778 756 776 717 719
& others
In Stock
Yes Usually ships in 2-3 business days
$1.95
163884 Bobbin Winder Locater Nut
Fits All 620, 630, 640, 700 T&S models
Left hand thread & used with 163246 above
In Stock
Yes Usually ships in 2-3 business days
$3.00
382710 - Slide Plate
Fits all 700 Series T&S
Free Arm Models
Does not fit Flat Bed models
In Stock
No Usually ships in 2-3 business days
Have some 2nd hand plates below
$13.90
174124 - Rubber Base Machine Cushion
1/2 (15/32)inch in length / 12mm - 700 Series Flat Bed
Fits: 750 - 755 - 756 - 758 & other flat bed models
In Stock
Yes Usually ships in 2-3 business days
$1.25 Each
382337R - Rubber Base Machine Cushion
3/8 inch in length / 9mm - 700 Series Free Arm
Fits: 770 - 775 - 776 - 778, etc (other # 381899)
In Stock
Yes Usually ships in 2-3 business days
$1.50 Each
421325 - Apollo Bobbin Case
Fits: 776 - 774 - 724 - 734 & Other Schoolastic models
Bobbins - 66 Class Plastic Bobbins Recommended
In Stock
Yes Usually ships in 2-3 business days
$11.95
153758 - Metal Bobbin Case
Fits: Early model 717 - 719
Others with metal bobbin case
In Stock
No Usually ships in 2-3 business days
$35.95
172820-656 - Tension Complete
Fits: All 700 Series T&S
In Stock
Yes Usually ships in 2-3 business days
$28.95
15287A - Bobbin Tire/Friction Ring
In Stock
Yes Usually ships in 2-3 business days
$1.15
181843 - Soft Touch Feed Dog
Fits 750 - 758 - 756 - 770 - 771 - 775 - 778 - 755
Metal Feed Dogs are available - click here
In Stock
Yes Usually ships in 2-3 business days
$12.95 Used item available - see at bottom of page
163117-002 - Lower Thread Guide
Obsolete Part To My Knowledge
Only available from donor machines
Used - Like New - If Available
In Stock
Yes Usually ships in 2-3 business days
$14.95
700 SERIES GEARS, MOTORS & OBSOLETE PARTS SECTION
382980 - Hook Drive Kit
Fits all 700 series T&S models - US Made Only
Helical cut design allows for smoother operation
and less noise
In Stock
Yes Usually ships in 2-3 business days
Kit replaces 163329 & 163997
Requires needle to hook & feed timing to be reset
$15.50
383273 - Feed Drive Gear - Large
Fits all 700 series T&S models - US Made Only
Same as 153487
In Stock
Yes Usually ships in 2-3 business days
$12.50 Requires feed timing to be reset
174488 - Feed Drive Gear - Long
Fits all 700 series T&S models -
US Made Only - Other part #'s
known: 153490 (Stylist Models)
In Stock
Yes Usually ships in 2-3 business days
$12.50 Requires feed timing to be reset
163997 - Hook Drive Gear
OEM Style Gear - Straight Cut Tooth Design
Proper mesh to 163329 a must to reduce
gear chatter/noise
In Stock
Usually ships in 2-3 business days
Yes
Requires needle to hook
& feed timing to be reset
$10.50
163329 - Hook Gear
OEM Style Gear - Straight Cut Tooth Design
Proper mesh to 163997 a must to reduce
gear chatter/noise
In Stock
Yes Usually ships in 2-3 business days
$10.50 Requires needle to hook timing to be reset
Testimonial
172312 - Hand Wheel Gear
Fits all 700 series T&S - US Made Only
In Stock
Yes Usually ships in 2-3 business days
$21.90
Lower Gear Replacement & Timing Only (Download Only)
700 Series Touch & Sew - Lower Gear Replacement & Timing Guide
For U.S. Made T&S only.  This guide shows how to remove the lower
long shaft, allowing gear replacement & how to set the timing.  This is
not for the novice with little patients, but for those that like to fiddle and
learn about their machine.  
Included in **My Own Repair Manual**
In Stock
Yes
$8.95
172690
Tension Stud Unit w/metal check spring
retainer.  Most models came with plastic
retainers, here is a metal replacement
Fits All 700 series T&S machines
In Stock
Yes Usually ships in 2-3 business days
$12.95
382904-111
Main Shaft Collar Kit Complete
includes 382904 retaining collar & 282904S screw kit
Fits: All 700 Series Touch & Sews
In Stock
No Usually ships in 2-3 business days
$3.25
313909-451- Rubber Base Cushion
3/8 inch over all length / 9mm
Slip on cushion - check you machine for correct item
Used on variety of different models
In Stock
Yes Usually ships in 2-3 business days
$1.50
Each
163990NS - Fiber Washer - Main Shaft
Fits: All 700 Touch & Sews, and 1060 Electronic
Main shaft knocking sounds, this is a main failure
part & these new washers are much easier to install
In Stock
Yes
Usually ships in 2-3 business days
$3.10
174282-001 - Belt Cog
Fits all 700 T&S Series
Yes Usually ships in 2-3 business days
In Stock
$8.95
Why Thread May Wrap Around The Bobbin Case (added 08/26/10)
Should you find any of my General Free Tips Helpful, perhaps you might consider making a small donation to help continue this
type of information.  All donations are via PayPal, and the amount is totally at your discretion...
$1.00 - $2.00 - $5.00, honestly...up to you, free knowledge is hard to come by today :)
163246U - Hook Driver / Bobbin Winder (Used)
Hook driver only, does not include washer or nut
No warranty, but does work as it should
In Stock
Yes
Usually ships in 2-3 business days
$10.00
163123 Needle Clamp Complete
Includes: 163123, 163431, 141453-880 &
163822 - Clamp, Screw, Gib, Thread Guide &
Clamp Screw -
Condition: Used - Like New
In Stock
Yes
Usually ships in 2-3 business days
$4.95
181843U - Soft Touch Feed Dog
Condition: Used - Very Good - Includes items
141896-451 mounting screws (2)
In Stock
No
Usually ships in 2-3 business days
$7.50
Pulls from donor unit - very good condition
172596UWS - Slide Plate - Flat Bed
This is as above, but has the wide slide on
the left side of the plate.  
Reference slide plate info to the right
Condition: Used - Functional - Some
marking & signs of wear are present
Yes
In Stock
Picture shows 2 plates for reference only
to slide plate spring configuration
$6.75
172596UNS - Slide Plate - Flat Bed
This is as above left, but has the narrow
slide on the left side of the plate.  
Reference slide plate info to the right
Condition: Used - Functional - Some
marking & signs of wear are present
In Stock
Yes
Picture shows 2 plates for reference only
to slide plate spring configuration
$6.75
For a little history of the 700 Series
Touch & Sew Slide Plate
Used Plates & Fitting Guide
174237 - Thread Pull Off Lever
Condition - Used - In Good Condition
No Spring - use existing spring from your unit
Am on the hunt for replacement springs
In Stock
No Usually ships in 2-3 business days
$5.95
750E3
750-13
756
758
717-776
719
734E-774E
737E3
700 Series
758-778
737-750-755-756-758-770-775-778
714-717-719-724-734-774-776
Schematics
163247 - Bobbin Winder Locater Washer
Used in all 600 - 700 Touch Sew Series
Used in 1411 & 1425 Series
Obsolete Part - Used - Good Condition
In Stock
No Usually ships in 2-3 business days
$8.75
382437U - Position Bracket
2nd hand - used - good serviceable item
Adjustment & tweaking may, or may not, be
required
In Stock
Yes
Usually ships in 2-3 business days
$2.50
182201 - Original Style Position Bracket
If you wish to keep original, this is the original
bracket the machine came with.  After the 770
series, they came with 342437, this was
mainly used in the Flat Bed Series only.
750 - 758 - 756
In Stock
No Usually ships in 2-3 business days
$2.50
172611-656 Top Lid - Rebuilt Tension,
New Spool Stop Sponge, with  new metal
tension stud
- Adjustments may be required
Note: Lid is not pristine, has some rough
spots, and small paint chip on the back
side - Fits 737 & 756 only
In Stock
Yes
Usually ships in 2-3 business days
Ships Flat Rate Game Box Only
$12.95
619313-002 - Used Motor with Pinion Gear
PA 28-8 Motor w/gear
Fits: 737, 755, 756, 758, 775, 778
Used Motor, Serviced, Tested & in good running condition
Usually ships in 2-3 business days
In Stock
Yes
Ships Medium Flat Rate Box Only
$35.00
603807-002- Used Motor with Pinion Gear
PA 31-8 Motor w/gear
Fits: 750 & 770
Used Motor, Serviced, Tested & in good running condition
In Stock
Yes Usually ships in 2-3 business days
Ships Medium Flat Rate Box Only
$40.00
153021H - Hook & Gear
Fits German Made Models: 700, 702, 706,
708, 720, 722, 726, 728, 740, 760
This has been an obsolete part for a long
time, but appears to be available again
Gear only see item - 153021G - gears page
In Stock
Yes
Usually ships in 2-3 business days
Special intro price - retail $109.90
Select Small Flat Rate Box for shipping
$84.95
619184-001 Actuating / Return Lever w/Spring
Fits Solid State Type Controllers
Does not fit Carbon Based Controllers
In Stock
Yes Usually ships in 2-3 business days
$6.00
163641 - Bobbin Winder Stop Latch Spring
Fits the 500A & 503 models
Fits around the winders activating lever
In Stock
Yes Usually ships in 2-3 business days
$3.50
163124 - Touch & Sew Bobbin Case
Fits: All 600 & 700 Series T&S with auto wind
bobbin, in working condition
Condition: Used - Pulls from tear downs
Note different styles used, click below
IIn Stock
No Usually ships in 2-3 business days
Different Styles
$25.00
170032 - Face Plate Hinge Pin
Fits: Slant-O-Matic, 600 & 700 Series T&S
In Stock
Yes Usually ships in 2-3 business days
$2.50
700 Series Combination Repair Manual - Get both my Guide & Singers Factory Guide - Save $6.95
$25.00