Timing guide 6200 Series
Schematic 6233 6234 6235
312966 - Hook Center Thread Pull Off
Fits:  6234 & 6235.
In Stock
No Usually ships in 2-3 business days
$3.45
312956 - Bobbin - Fits most 6235 series
Also fits 4613 - 4617 - 4623
Others with a center push wind post
In Stock
Yes Usually ships in 2-3 business days
$0.85
Counter
Free Stuff & Schematics
312777 - ZigZag Needle Plate
Fits: 6202, 6211, 6212, 6215, 6217,
6233, 6234, 6235, 6267, 6268,
9110/3/7/24/33, 9416, 9606, 9608
In Stock
Yes Usually ships in 2-3 business days
$9.95
Schematic 6211 - 6212 - 6214 - 6215 - 6217
Tip on Item 312966:
Also fits later model Touch Tronic's if equipped - check your machine for this part
Does your machine loop thread underneath - break thread - jam in the bobbin case
This is a fairly common part required in some series, but a rather difficult part to come by.
Some models may have two tangs underneath this part, and some will not, if not they will need to be removed.
Remove yours first, and double check it before ordering, modification may be required
Custom Search
Service Manual
Service Manual 6200 Series
Models: 6233 - 6234 - 6235
Download Only - no hard copy sent
$14.00
Parts
446357 - Crank Slide
Fits many models, comes with
bushing adapter for other models that
require it - See note below for models
In Stock
Yes Usually ships in 2-3 business days
$10.95
446357 Crank Slide Fits: 1812, 2712, 2718, 2722, 2724, 2730, 2732, 4325, 4522, 4525, 4526, 4528, 4530, 4538, 57817, 57820, 57825, 5802,
5805, 5806, 5808, 5810, 5825, 5830, 5838, 6021, 6201, 6217, 6221, 7021, 7025, 9802, 9836, CG500, CG550, CG590, FM17, FM19, FM22
313605 - Thread Retainer Complete
Per Vendor it fits:
6233, 6234, 6235, 6267, 6268
In Stock
Yes Usually ships in 2-3 business days
$14.75
313605-999 - Thread Retainer Felt
Per Vendor it fits:
6233, 6234, 6235, 6267, 6268
In Stock
Yes Usually ships in 2-3 business days
$4.75
421864-451 - Feed Control Dial
Fits all: 6100 - 7100 & 8100 machines
ie: 6105 - 6110 - 6136 etc...save the chrome ring
off the machine and install on this dial.  
Improved finger grip and uses original
compression ring if equipped
In Stock
Yes Usually ships in 2-3 business days
$22.50
Service Manual for the 6100 Series
Models Listed: 6101- 02- 03 04 -05 - 06
Should also apply to: 6174 - 6184 - 6110 &
other 6100 Series not listed here
$14.00 Download Only - no hard copy sent
Schematic 6101-02-03-04-05-06 Series
Service Manual for the 6211 and 6212
121 pages and about 14meg in download
size
Download Only - no hard copy sent
$14.00